DSpace logo

Please use this identifier to cite or link to this item: https://repositorio.uide.edu.ec/handle/37000/2459
Title: Diferencia de torque y potencia en función del rin del neumático
Authors: Molina Narváez, Juan Francisco
Larrea Mejía, David Fernando
Tutor: Reyes, Gorky
Keywords: TORQUE;POTENCIA;RIN DEL NEUMÁTICO;VELOCIDAD
Issue Date: Jan-2018
Publisher: QUITO/UIDE/2018
Citation: Molina Narváez,Juan Francisco;Larrea Mejía, David Fernando. (2018). Artículo de Investigación para la obtención del Título de Ingeniería en Mecánica Automotriz. Facultad de Mecánica Automotriz. UIDE. Quito. 112p.
Abstract: A nivel nacional un vehículo cuando sale de fábrica, todos sus componentes son originales, y existen varios usuarios que desean cambiar ya sea por estética o uso, por tal motivo hay varios tecnicentros que recomienda el cambio de estos para adecuarse más a la personalidad del propietario, los mismos que por estética y rendimiento realizan cambios como el modificar el tamaño del rin y varios componentes más del vehículo; pero en la investigación el vehículo Chevrolet Spark LT del año 2012, un automóvil muy comercializado en Ecuador, con la medida de neumático recomendada por el fabricante y el mismo vehículo con otro “rin” más grande al usual, determinó cuáles son las diferencias que se tiene con respecto al torque y potencia que muestra el vehículo en régimen de revoluciones alto y bajo. Se realizó un ensayo de medición de torque y potencia en un dinamómetro el cual permitió reconocer las diferencias que existe en el vehículo. Los resultados mostraron que con una variación de “rin” en el vehículo de prueba, se obtuvo una disminución de más del 7% de torque, y más del 4% de potencia. A partir del análisis realizado, no es recomendable para el rendimiento del vehículo tanto en ahorro de combustible como desempeño del mismo, cambiar de rin a los vehículos por unos diferentes a los recomendados por el fabricante.
At the national level a vehicle when it leaves the factory, all its components are original, and there are several users who want to change either aesthetics or use, for this reason there are several automotive shops that recommends the change of these to suit more the personality of the owner , the same ones that for aesthetics and performance make changes such as modifying the size of the wheel and several other components of the vehicle; but in the investigation the Chevrolet Spark LT vehicle of the year 2012, a car very commercialized in Ecuador, with the tire size recommended by the manufacturer and the same vehicle with another "rin" larger than usual, determined which are the differences that are it has with respect to the torque and power that the vehicle shows in high and low revolutions. A torque and power measurement test was performed on a dynamometer which allowed recognizing the differences that exist in the vehicle. The results showed that with a "rin" variation in the test vehicle, a decrease of more than 7% of torque was obtained, and more than 4% of power was obtained. Based on the analysis carried out, it is not advisable for the performance of the vehicle, both in terms of fuel savings and performance, to change the vehicle's rims by a number different from those recommended by the manufacturer.
URI: http://repositorio.uide.edu.ec/handle/37000/2459
Appears in Collections:Tesis - Mecánica Automotriz

Files in This Item:
File Description SizeFormat 
T-UIDE-1752.pdfTESIS A TEXTO COMPLETO3.97 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons