Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.uide.edu.ec/handle/37000/2432
Título : | Diseño y construcción de un sistema de aire comprimido Para el uso de herramienta neumática |
Autor : | Carrión Campana, Raúl Andrés |
Tutor: | Cajas, Edgar |
Palabras clave : | CONSTRUCCIÓN;SISTEMA DE AIRE COMPRIMIDO;HERRAMIENTA NEUMÁTICA;MECÁNICA AUTOMOTRIZ |
Fecha de publicación : | oct-2017 |
Editorial : | QUITO/UIDE/2017 |
Citación : | Carrión Campana,Raúl Andrés. (2017). Diseño y construcción de un sistema de aire comprimido Para el uso de herramienta neumática. Facultad de Mecánica Automotriz. UIDE. Quito. 122p. |
Resumen : | Básicamente el cálculo del sistema de aire comprimido para el taller de automotriz de la presente tesis, se debe conocer las necesidades del número de tomas de aire, en base a los requerimientos de herramientas y procesos a utilizar en el mismo. Se obtendrán datos de cada una de las herramientas neumáticas, respecto al caudal y presión necesaria para su correcto funcionamiento, generalmente el fabricante proporciona estos datos, se deberá tomar en cuenta la frecuencia de utilización de las herramientas, para promediar el caudal que utilizarán en la jornada de trabajo. Tomando en cuenta estos datos se procede al cálculo de las características del compresor, su potencia y velocidad deberá ser suficiente para cumplir con los requerimientos de caudal y presión anteriormente calculados, sin olvidar las extensiones de nuevas herramientas que podrían darse a futuro... Basically the calculation of the compressed air system for the automotive shop of this thesis, the needs of the number of air intakes must be known, based on the requirements of tools and processes to be used in it. Data will be obtained from each of the pneumatic tools, with respect to the flow and pressure necessary for their correct operation, generally the manufacturer provides these data, the frequency of use of the tools must be taken into account, in order to average the flow rate that they will use in the working day. Taking these data into consideration, the compressor characteristics are calculated, its power and speed should be sufficient to meet the previously calculated flow and pressure requirements, not to mention the extensions of new tools that could be available in the future... |
URI : | http://repositorio.uide.edu.ec/handle/37000/2432 |
Aparece en las colecciones: | Tesis - Mecánica Automotriz |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
T-UIDE-1730.pdf | TESIS A TEXTO COMPLETO | 3.56 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons