DSpace logo

Please use this identifier to cite or link to this item: https://repositorio.uide.edu.ec/handle/37000/1927
Title: Construcción de un banco de pruebas para el motor J3 CRDI de Hyundai Terracan GL EX
Authors: Andrango Bonilla, Diego Nicolás
Keywords: CONSTRUCCIÓN;MOTOR J3 CRDI;HYUNDAI TERRACAN GL EX;MECÁNICA AUTOMOTRIZ
Issue Date: Apr-2017
Publisher: QUITO/UIDE/2017
Citation: Andrango Bonilla,Diego Nicolás. (2017). Construcción de un banco de pruebas para el motor J3 CRDI de Hyundai Terracan GL EX . Facultad de Mecánica Automotriz. UIDE. Quito. 50p.
Abstract: La tesis desarrollada presenta documentación técnica y práctica sobre la construcción de un banco de pruebas para el motor J3 con sistema de inyección Common Rail del Hyundai Terracan GL EX para el diagnóstico y las pruebas en el que la comunidad universitaria puede verificar su funcionamiento evaluado en el banco de pruebas y conocer las posibles averías que puedan presentar el motor por medio del análisis de los parámetros de funcionamiento de este tipo de motor CRDI. Para la elaboración de la estructura del banco de pruebas se realizó cálculos estructurales para impedir que el banco de pruebas sufra algún tipo de deformación al momento de entrar en funcionamiento y también para poder elegir los materiales adecuados y resistentes, para la elaboración de la estructura los materiales elegidos están bajo la norma de calidad ASTM pues son materiales resistentes a sufrir algún tipo de deformación y corrosión además son materiales muy comunes en nuestro mercado...
The developed thesis presents the technical documentation and the practice on the construction of a test bench for the J3 engine with the common injection system the rail of the Hyundai Terracan GL EX for the diagnosis and the tests in which the university community can verify its Operation evaluated in the Test Bank and to know the possible damages that can present the motor by means of the analysis of the parameters of operation of this type of motor CRDI. For the development of the structure of the test bed, structural calculations were carried out to prevent the test bed from suffering any type of deformation when it was put into operation and also to be able to choose the appropriate and resistant materials for the construction of the structure The chosen materials are under ASTM quality standard because they are resistant materials to undergo some type of deformation and corrosion in addition to the materials very common in our market...
URI: http://repositorio.uide.edu.ec/handle/37000/1927
Appears in Collections:Tesis - Mecánica Automotriz

Files in This Item:
File Description SizeFormat 
T-UIDE-135.pdfTESIS A TEXTO COMPLETO1.07 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons