DSpace logo

Please use this identifier to cite or link to this item: https://repositorio.uide.edu.ec/handle/37000/750
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorIñiguez, Juan Fernando-
dc.contributor.authorTreviño Andino, Andrés Eduardo-
dc.contributor.authorSalazar Zúñiga, Jorge Andrés-
dc.coverage.spatialSede Quitoes_ES
dc.creatorTreviño Andino, Andrés Eduardo-
dc.creatorSalazar Zúñiga, Jorge Andrés-
dc.date.accessioned2015-09-07T20:51:18Z-
dc.date.available2015-09-07T20:51:18Z-
dc.date.issued2012-
dc.identifier.citationTreviño Andino, Andrés Eduardo; Salazar Zúñiga, Jorge Andrés. 2012. Estudio para el Diseño y Construcción de un Buggy para la Fórmula Automovilística Universitaria. Facultad de Ingeniería Automotriz. UIDE. Quito. 161 p.es_ES
dc.identifier.otherBQU'052866-
dc.identifier.urihttp://repositorio.uide.edu.ec/handle/37000/750-
dc.description.abstractEl presente proyecto trata de diseñar y construir un vehículo tipo buggy para la Formula Automovilística Universitaria FAU. Siendo esta Fórmula uno de los pilares fundamentales para este proyecto desarrollándose a través de cada uno de sus capítulos y su construcción en la que utilizó todos los conocimientos adquiridos en las diferentes áreas de la Ingeniería Automotriz. Este trabajo, cuenta con cuatro Capítulos desde la fase de la normativa hasta llegar a finalizar la fase de construcción y los cuales se detallan a continuación, en el capítulo I, Historia de la FAU, tenemos el marco teórico con todas las Reglamentaciones de construcción de este tipo de vehículos así como también conceptos básicos. El capítulo II Diseño y Construcción del Bastidor como se fabricó la base de este proyecto con una Estructura Tubular. El capítulo III corresponde al Diseño de la Suspensión del vehículo siendo este el más importante del trabajo, se realiza cálculos de los diferentes parámetros de diseño; el capítulo IV se refiere al Cálculo y Construcción del Sistema de Frenos y Dirección, en donde además indicamos el Tren de Potencia del vehículo prototipo finalizando con las Conclusiones y Recomendaciones basadas en los objetivos planteados para la elaboración de este tipo de vehículos.es_ES
dc.description.abstractThis project aims to design and build a buggy type vehicle for Formula Car University FAU Since this formula one of the cornerstones for this project to develop through each of its chapters and its construction in which he used all the knowledge acquired in the different areas of Automotive Engineering. This paper has four chapters from the phase of the legislation to actually finish the construction phase and which are detailed below, in Chapter I, History of the FAU, we have the framework with all building regulations such vehicles as well as basic concepts. Chapter II Design and Construction of the frame and was made the basis of this project with a tubular structure. Chapter III is for the design of the suspension of the vehicle being the most important work is carried out calculations of the various design parameters, Chapter IV deals with the calculation and construction of Brake System and Management, where he also indicated the vehicle powertrain prototype ending with the Conclusions and Recommendations based on the objectives for the development of such vehicleses_ES
dc.format.extent161 p.es_ES
dc.language.isospaes_ES
dc.publisherQuito / UIDE / 2012es_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectCONSTRUCCIONes_ES
dc.subjectBUGGYes_ES
dc.subjectFORMULA AUTOMOVILISTICAes_ES
dc.subjectCHASISes_ES
dc.titleEstudio para el Diseño y Construcción de un Buggy para la Fórmula Automovilística Universitariaes_ES
dc.typebachelorThesises_ES
Appears in Collections:Tesis - Mecánica Automotriz

Files in This Item:
File Description SizeFormat 
T-UIDE-0685.pdfTesis a texto completo3.93 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons